Frequently Asked Questions
What would be the best place to mount the unit?
On a flat surface closest to the tangling of excess wire. In all cases, the unit may be mounted on a desk or wall near the surge protector or power source outlet.
When should the tape or screws provided be used?
The tape will work for all situations and is very easy and quick to do. Surface area should be clean and dry before applying the tape. If many of the wires are thick, using the screws may ensure a more secure positioning of the unit.
Should the wires be placed in the unit base before mounting?
It is better to first mount the unit base. Once positioned, it is easier to do the wire placement and minimize excess tangling.
Is there a preferred wire looping pattern?
Yes. Run the wires through the center of posts, only leaving the center to loop in the opposite direction. This will form a figure 8 pattern which will hold the wires more firmly in place. The Wiremate is designed to contain 50% of the wires within the posts, holding them securely, regardless of how they are looped, but a figure 8 pattern is recommended.
If very thick wires are present, how should the wire looping occur?
The unit base is designed to handle the looping of varying wire thickness. For an extremely thick wire, loop it to an adjacent column of posts to allow easier bending of the wire. It should be rarely necessary to do this.
Please contact us if you have any further questions or suggestions about this product.
